Frequently Asked Questions

Why do we care about Gas, anyway?
Gas (CO2 and sometimes N2) is a normal ingredient in beer. Gas is also the method we use to push beer from the keg to the glass. The right balance of gases will keep the dissolved gas levels perfect and the wrong balance will damage the beer by changing dissolved gas levels in the beer. Any change in gas levels will affect the flavor and appearance of the beer. The primary concern is gas content change and the key elements at work are pressure and temperature.

What is Pressure?
Pressure is the force of gas molecules hitting the walls (and floor and ceiling) of a container. The amount of force (pressure) depends on the number of molecules hitting the surfaces and the speed at which they hit. For the explanation we'll start with the following example. Imagine and empty beer keg psig of CO2 sitting in a cooler, not connected (without a coupler)

What is Pressure and Temperature?
Our keg contains an unchanging number of molecules of CO2. If you take the keg into the sun and let it warm up those molecules will move faster, hit the walls harder and exert more pressure. Put our keg into the freezer and the molecules will slow down, hit the walls with less speed and force and the pressure will drop.

What is Pressure and Volume?
Take the keg out of the freezer and back into the cooler. Magically, let's fill it half full of beer. Our keg now has the same number of CO2 molecules but half the space. The number of molecules remains the same, the speed remains the same, but they are hitting less wall (more often) so there is more force on each part of the wall and the pressure increases.

What are Pressure Changes?
Pressure changes if we change temperature, volume or the number of molecules.

What is Gas Absorption?
Under normal beer dispensing conditions gas molecules are constantly going in and out of solution in beer. Gas molecules hit the surface and dive in while dissolved molecules hit the surface and break out.

What is Gas Absorption and Pressure?
If we increase the pressure, the gas molecules hit the surface of the liquid faster, and/or more often. After a pressure increase, more molecules are going in than are going out. This process continues until equilibrium is reached. At equilibrium, enough molecules are absorbed that the same number of molecules are leaving as are entering.

What is Gas Absorption and Temperature?
When the temperature rises, the dissolved molecules move faster, hitting the surface harder and more often, causing more of them to break out. As it gets colder the opposite is true... So colder beer temperatures keep more gas in solution if the pressure remains constant. Warmer temperatures require more pressure to keep the same amount of gas in solution.

What are Partial Pressures?
If the keg is filled with more than one type of gas molecule (N2 and CO2 for example) each gas acts independently. If there were enough CO2 molecules in a keg to generate 15 psi of CO2 and you added enough N2 to bring the total pressure to 25 psi you still have 15 psi worth of CO2 molecules hitting the surface and entering solution. Of the CO2 was in equilibrium before adding the N2 it will stay at equilibrium after adding the N2: Adding enough N2 to take the total pressure to 1000 psi will not change the number of CO2 molecules or the force with which they strike the surface or the amount of CO2 dissolved in the beer.

What is Absolute Pressure?
For the most part, we all live at one atmosphere of pressure. One atmosphere is 14.7 (15) psi above complete vacuum. Absolute pressure (PSIA) starts at complete vacuum (no gas Molecules at all). Gauge Pressure (PSIG) is always indicated from one atmosphere which changes with altitude and barometric pressure. When we think of gas dissolved in beer it is necessary to think in terms of absolute (PSIA) pressure since to get all of a gas out of a liquid at normal temperature it is necessary to expose it to a vacuum. A keg half full of beer and half full of CO2 at O PSIG still has 15 PSIA worth of CO2 molecules doing their thing.